루미논카노네스🌨️ @atLuminon@byeolvit.space
Public

아이패드를 팔아서 돈이 좀 생겼기 때문에 묵혀놨던 뻘짓 위시리스트 를 한 번 시도해보려고요

KOSS KSC75 MMCX adapter by gumo_design

STEP file uploaded. Now you can edit it more easily.This is the replacement part for you to put MMCX connector on your KOSS KSC75.You still need to get female connectors to fit this design.You may get them here:https://www.aliexpress.com/item/33035633031.html(I used type B connectors)And you need some M2x3mm screws to assemble the part onto the driver.Or you may just glue them on.*The holes on the headphone back are precisely 2mm. So if you use 2mm scerws they will be too loose. That's why I built a "short pitch" file. The slightly staggered holes make the screw tighter. Or you may just use some method like instant glue or thin pieces of plastic to tighten the holes on the headphone back. Then you can use a "normal pitch" file which has just aligned holes to the headphone back.

www.thingiverse.com · Thingiverse

0
0
0

If you have a fediverse account, you can quote this note from your own instance. Search https://byeolvit.space/notes/a5kk22we1p on your instance and quote it. (Note that quoting is not supported in Mastodon.)