What is Hackers' Pub?

Hackers' Pub is a place for software engineers to share their knowledge and experience with each other. It's also an ActivityPub-enabled social network, so you can follow your favorite hackers in the fediverse and get their latest posts in your feed.

0
0
0
Horologram @horologram.bsky.social@bsky.brid.gy
Public
Shared by Silverkey | 은열쇠

이상하게 들리겠지만 이미 용접 절삭 이런것들 기계가 훨씬 잘합니다;; 예를 들면 자동차에 있는 부품들 사람이 손대서 나오는거 하나도 없어요... 품질이 아주 아주 약간이라도 떨어지면 바로 스크랩 처리됩니다;; 반도체 생산과 크게 다를바 없고요; 사람이 하는건 기계가 할정도로 대량생산되지 않는 아주 소량의 커스텀 부품들이니까 그런것입죠 이제 그런것도 기계나 로봇이 하려고 하는것이고요... ㅎㅎ;;

0
0
0
👽진짜 슬릿(계이중받아주세효) @5l1t.bsky.social@bsky.brid.gy
Public

SF풍 카드홀더 생각대로 착착착 만들어지고 있어서 기분은 좋음 복제는 문제가 안되는데... 저 안에 들어가는 투명 홀더가 집에 12개정도 있고 그중에 4개는 삐얌이랑 내가 쓸거구 8개정도 팔 수 있을득함 그리고 불투명 흰색으로 복제할테니 도색은 각자 알아서 합쉬다 제가 도색커미는 기력없어서 ㄹㅇ 못하겟은...아크릴 물감으로 해두 ㄱㅊ아요...나도 그냥 회색 서페이서 치고 메탈릭마카로 칠할거라... 구매하심 동그라미 부분에 들어가는 스티커 규격을 알려드림미다 쇼로롱

0
0
0
Horologram @horologram.bsky.social@bsky.brid.gy
Public

도요타 공장 사례 보시면 좋습니다 놀랍게도(?) 미국 텍사스에 있는 공장 촬영이고요 보면 조립과 검수가 주작업이고요... www.youtube.com/watch?v=En0F...

INSIDE Toyota Texas Plant: Raw...

INSIDE Toyota Texas Plant: Raw Metal to Road-Ready in 2 Days, 1 Every 67sec | Capturing Car Culture

Every 67 seconds, a Toyota Tundra or Sequoia rolls off the assembly line in San Antonio, Texas. For the first time ever, Toyota has allowed an outsider to to...

www.youtube.com · YouTube

0
0
0
The Rt. Rev. Fumire, Ph.D. :twitter__verified_organization: @fumire@uri.life
Public

🍝 날아다니는 스파게티 괴물 님, 절 구하소서.
😋 저의 주님, 어서 오셔서 저를 도우소서.

영광이 미트볼🧆과 소스🥫와 성면(the Holy Noodle)🍝께.
처음과 같이 이제와 항상 영원히. 라-멘 🍜

🍝 날아다니는 스파게티 괴물 님께서 당신 뜻과 함께 하는 사람들을 언제나 도와주고 계시니, 감사드리는 마음으로 기도합시다.
😋 저의 주님, 날아다니는 스파게티 괴물 님, 저희에게 은총을 베푸소서.

"6. 당신의 은총으로 오늘 저희가 맺은 모든 관계를 축복하시고, 내일도 사랑으로 이어지게 하소서."

저의 주님, 날아다니는 스파게티 괴물 님,
이 몸을 편히 쉬게 하시고, 우리가 오늘 애써 뿌린 씨가 영원한 열매를 맺게 하소서.
라-멘 🍜

2026-01-31T17:50:41+09:00


0
0
0
0
0
0
樂流 @exilestories@threads.net
Public

有啲人自知實力係得咁多，成績上贏唔到人，但佢地又想人地覺得自己好重要，所以佢地鍾意危言聳聽製造危機。

佢地嘅才能在於興波作浪，不在解決問題，當佢地上咗位成為眾人焦點之後，就會不斷製造問題。做嘢嘅人實在唔想嘥時間應付呢啲根本唔係問題嘅問題，一係被邊緣化鬱鬱不得志，一係就心灰意冷另謀高就。

呢種人掌權最鑊嘅位係，佢才能嘅上限等於全班人才能嘅上限，容不下比佢地有能嘅人，因為一對比就會穿煲。

呢種情況各種大小組織比比皆是。

0
0
0
0
0
0
Justine Smithies @justine@snac.smithies.me.uk
Public
Shared by Stefano Marinelli

I've got a weird issue on my ThinkPad. Since setting up lagg yesterday which worked fine. I powered off last night and then switched it on this morning. I noticed that I had no network access on either the re1 interface or wlan0. I powered off and on and it worked. I have since discovered that if it doesn't work if I just doas service netif restart it starts to work again.

This is my lagg setup in /etc/rc.conf

# WiFi
wlans_iwlwifi0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
cloned_interfaces="lagg0"
ifconfig_lagg0="up laggproto failover laggport re1 laggport wlan0 DHCP"
This is the output of ifconfig when it's working:

re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 8c:8c:aa:bd:bb:f0
	media: Ethernet autoselect (none)
	status: no carrier
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE>
	ether 8c:8c:aa:bd:bb:ef
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 70:9c:d1:af:ad:93
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	groups: wlan
	ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3
	regdomain FCC country US authmode WPA2/802.11i privacy ON
	deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17
	bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
	ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht
	vht40 vht80 vht160 -vht80p80 wme roaming MANUAL
	parent interface: iwlwifi0
	media: IEEE 802.11 Wireless Ethernet VHT mode 11ac
	status: associated
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 00:00:00:00:00:00
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	laggproto failover lagghash l2,l3,l4
	laggport: re1 flags=5<MASTER,ACTIVE>
	laggport: wlan0 flags=0<>
	groups: lagg
	media: Ethernet autoselect
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
This is the output when not working on first boot:

re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 8c:8c:aa:bd:bb:f0
	media: Ethernet autoselect (none)
	status: no carrier
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE>
	ether 8c:8c:aa:bd:bb:ef
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 70:9c:d1:af:ad:93
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	groups: wlan
	ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3
	regdomain FCC country US authmode WPA2/802.11i privacy ON
	deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17
	bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
	ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht
	vht40 vht80 vht160 -vht80p80 wme roaming MANUAL
	parent interface: iwlwifi0
	media: IEEE 802.11 Wireless Ethernet VHT mode 11ac
	status: associated
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 00:00:00:00:00:00
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	laggproto failover lagghash l2,l3,l4
	laggport: re1 flags=5<MASTER,ACTIVE>
	laggport: wlan0 flags=0<>
	groups: lagg
	media: Ethernet autoselect
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
I should note that running doas service netif restart once it's working makes it fail again.

Any ideas ??
0
0
0
0
0
0
1
0
0
Koen de Jonge - SynQ @koen@procolix.social
Public

Dear people. There is a massive server now in Europe: pixelfed.com open for everyone (just people, no organsations).

Hosted from the Netherlands under Dutch law and funded by the @fediversity project.

Please enter a human reason when onboarding (due to AI slop we must do that).

Do join and boost please. 🙏🏻

Pixelfed

Pixelfed is an image sharing platform, an ethical alternative to centralized platforms. Hosted by <a href="https://fediversity.eu">Fediversity</a>.

pixelfed.com · Pixelfed

0
0
0
Justine Smithies @justine@snac.smithies.me.uk
Public

I've got a weird issue on my ThinkPad. Since setting up lagg yesterday which worked fine. I powered off last night and then switched it on this morning. I noticed that I had no network access on either the re1 interface or wlan0. I powered off and on and it worked. I have since discovered that if it doesn't work if I just doas service netif restart it starts to work again.

This is my lagg setup in /etc/rc.conf

# WiFi
wlans_iwlwifi0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
cloned_interfaces="lagg0"
ifconfig_lagg0="up laggproto failover laggport re1 laggport wlan0 DHCP"
This is the output of ifconfig when it's working:

re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 8c:8c:aa:bd:bb:f0
	media: Ethernet autoselect (none)
	status: no carrier
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE>
	ether 8c:8c:aa:bd:bb:ef
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 70:9c:d1:af:ad:93
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	groups: wlan
	ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3
	regdomain FCC country US authmode WPA2/802.11i privacy ON
	deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17
	bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
	ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht
	vht40 vht80 vht160 -vht80p80 wme roaming MANUAL
	parent interface: iwlwifi0
	media: IEEE 802.11 Wireless Ethernet VHT mode 11ac
	status: associated
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 00:00:00:00:00:00
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	laggproto failover lagghash l2,l3,l4
	laggport: re1 flags=5<MASTER,ACTIVE>
	laggport: wlan0 flags=0<>
	groups: lagg
	media: Ethernet autoselect
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
This is the output when not working on first boot:

re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 8c:8c:aa:bd:bb:f0
	media: Ethernet autoselect (none)
	status: no carrier
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE>
	ether 8c:8c:aa:bd:bb:ef
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 70:9c:d1:af:ad:93
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	groups: wlan
	ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3
	regdomain FCC country US authmode WPA2/802.11i privacy ON
	deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17
	bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
	ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht
	vht40 vht80 vht160 -vht80p80 wme roaming MANUAL
	parent interface: iwlwifi0
	media: IEEE 802.11 Wireless Ethernet VHT mode 11ac
	status: associated
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=0
	ether 8c:8c:aa:bd:bb:ef
	hwaddr 00:00:00:00:00:00
	inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255
	laggproto failover lagghash l2,l3,l4
	laggport: re1 flags=5<MASTER,ACTIVE>
	laggport: wlan0 flags=0<>
	groups: lagg
	media: Ethernet autoselect
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
I should note that running doas service netif restart once it's working makes it fail again.

Any ideas ??
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
👽진짜 슬릿(계이중받아주세효) @5l1t.bsky.social@bsky.brid.gy
Public

양면이 되었어요... 생각보다 잘? 만들어지고 있습니다 일단 오늘 퍼티 올리고 쓸디 펜 부분 다듬었는데그라인더를 쓸거면 스리디펜은 안쓰는게 좋을 듯 함 출력물은 abs고 펜은 pla라 미스매치도 잇는 것 같고...아니 그리고 타미야 베이직 퍼티 왜 죄다 품절임?? 무튼 내일은 그라인더 날 세워서 각잡아주고>사포질>파츠 붙이기>건조>>월요일 복제 이케하몬 될 득

0
0
0
0
0
0
1
0
0
1
0
0
0
0
0
0
0
0
0
0
0
Hilda Bastian @hildabast@mastodon.online
Public
Shared by Ael Yokan

Another vaccine approval and more in my latest next generation Covid vax update:

- Self-amplifying mRNA vax Kostaive approved in the UK

- New trial for a mucosal vax on the starting blocks in Finland

- Some results from AstraZeneca phase 1 trial for mRNA vax

- 11 preclinical reports, including 2 for mucosal pancoronavirus vaccines

absolutelymaybe.plos.org/2026/

Another Approval and More NextGen Covid Vax News (Update No 37) - Absolutely Maybe

This month, Arcturus’ self-amplifying mRNA vaccine was approved for use in the UK. There were also new clinical trial results for another…

absolutelymaybe.plos.org · Absolutely Maybe

0
0
0
0
0
0
0
0
0
0
0
0
🍄OK🐙 @c0KeW3i@g0v.social
Public

最近三年都以每年一次的頻率去到日本，基本上也就是參加演唱會，所以路線場所等等都滿固定的。
看著固定吃飯的地方，店員還是那位店員，這邊的打工換成了新人，去年整修的路段今年修好了，原本沒有置物櫃的車站多了置物櫃，之前看到路邊的有點興趣的店家今年不見了，明顯賣觀光客的紀念品則還是生存了下來。

一年一年這樣細小的變化，就像看好久不見的朋友一樣在一年之間又產生了一些變化 w

最後還是要說，獨旅最大的缺點就是真的會著迷上這樣的氛圍，這四天依舊除了最基本的和店員交談，我幾乎都沒開口，想去哪就去哪，想休息就休息，每天的社交電量都幾乎沒耗電啊。

0
0
0
Kushal Das :python: :tor: @kushal@toots.dgplug.org
Public

RE: mastodon.social/@hugovk/115988

So happy to see that quote on the stage. Some people freaked out when I gave the lighting talk "All code is political" a few years ago in youtu.be/p_Vx3gDHeUI?t=1779

Update: years, not hours. Someday I will learn to type properly.

0
0
0
0
0
0
0
0
0
0
0
0
Horologram @horologram.bsky.social@bsky.brid.gy
Public

이상하게 들리겠지만 이미 용접 절삭 이런것들 기계가 훨씬 잘합니다;; 예를 들면 자동차에 있는 부품들 사람이 손대서 나오는거 하나도 없어요... 품질이 아주 아주 약간이라도 떨어지면 바로 스크랩 처리됩니다;; 반도체 생산과 크게 다를바 없고요; 사람이 하는건 기계가 할정도로 대량생산되지 않는 아주 소량의 커스텀 부품들이니까 그런것입죠 이제 그런것도 기계나 로봇이 하려고 하는것이고요... ㅎㅎ;;

0
0
0
0
0
0
0
0
1
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0